................................................Return to Harv's Index Page
.....................Previous Page..................................................................Next Page.
........................................--- Chute Pull and Misc. ---..........
....................
I put the stock Saturn surge tank on because the hi freq. welder is on the fritz (couldn't make a aluminum one)and it was handy.
....................
The water system is installed. The upper water line is grounded and the temp switch in the tubing pulls the fan solenoid to ground at 200F.
....................
The back of the radiator is a long way from the pump The blue wire hanging down is for the ice water pump. The red one is for the chute release solenoid which I probably won't use unless I put another chute on.
....................
The 10 micron filter is installed between the fuel pump and regulator. This completes the basic fuel system.
....................
The TecII is wired. Waiting for a test run then loom.
....................
The front part of the chute release mechanism. Not high tech but quick and dirty.
....................
Parker pumper for the air helmet.It will pull through holes drilled in the outer skin. Think it'll help reattach some boundary air?
....................
Chute pull handle above the gear shift knob.
....................
When I smoke tested the wiring the tach surprised me by lighting up.Won't that look cool if I drive this low rider to the In & Out for a burger some night?